MadHQ's odd coding problems.

[Renegade]

Umm...your foundation code is totally not making sense to me.

For that foundation, according to the generator, it should look like

Code:

[CATEMP]
Foundation = Custom
Foundation.X = 5
Foundation.Y = 4
Foundation.0 = 1,0
Foundation.1 = 2,0
Foundation.2 = 0,1
Foundation.3 = 1,1
Foundation.4 = 2,1
Foundation.5 = 3,1
Foundation.6 = 4,1
Foundation.7 = 0,2
Foundation.8 = 1,2
Foundation.9 = 2,2
Foundation.10 = 3,2
Foundation.11 = 4,2
Foundation.12 = 1,3
Foundation.13 = 2,3
FoundationOutline.Length = 22
FoundationOutline.0 = 0,-1
FoundationOutline.1 = 1,-1
FoundationOutline.2 = 2,-1
FoundationOutline.3 = 3,-1
FoundationOutline.4 = -1,0
FoundationOutline.5 = 0,0
FoundationOutline.6 = 3,0
FoundationOutline.7 = 4,0
FoundationOutline.8 = 5,0
FoundationOutline.9 = -1,1
FoundationOutline.10 = 5,1
FoundationOutline.11 = -1,2
FoundationOutline.12 = 5,2
FoundationOutline.13 = -1,3
FoundationOutline.14 = 0,3
FoundationOutline.15 = 3,3
FoundationOutline.16 = 4,3
FoundationOutline.17 = 5,3
FoundationOutline.18 = 0,4
FoundationOutline.19 = 1,4
FoundationOutline.20 = 2,4
FoundationOutline.21 = 3,4

The issues are immediately apparent when you see that, not only do you have way, way too few cells, but the two you have defined are actually outside of the foundation area (and both in the same spot).
If you actually did get that code from the foundation generator, the issue is not reproducible to me, and I'd like to hear how you created it.

If you coded that manually and just painted in the generator for illustration purposes, I suggest using the generator's code next time.

(Note that you also had superfluous outline cells which I did not add.)